Nitrate logger sensor NUL-241

The NeuLog nitrate sensor can be used to measure the concentration of nitrate ions (NO3) in aqueous samples. Nitrates are used in fertilizers and can contaminate water. Also, untreated human sewage can be a source of nitrate contamination. Nitrate measurements can also be very relevant to study the nitrogen cycle in general and to relate this cycle to plants and algae.

 

Product features

  • Logger sensor for measuring concentration of nitrate ions (NO3-) in aqueous samples
  • Can be used to monitor chemical reactions, water quality, environmental health, and small animal behavior for further study
  • Ion-selective electrode probe for calculating nitrate levels
  • Required accessories. To use sensors you will need either: a USB Module (USB 200) to connect via USB cable to PC or Mac, or a Wi-Fi Module (WIFI201) and battery (BAT200) to connect to any Wi-Fi enabled device (Smart Phone, Tablet, Computer)
  • Sealed, gel-filled reference chamber for ease of use

Product description

 

NeuLog logger sensor is used to measure the concentration of nitrate ions (NO3-) in aqueous samples, and can be used to monitor chemical reactions, water quality, environmental health, and small animal behavior for further study. The logger sensor has an attached ion-selective nitrate electrode probe for calculating nitrate levels, with a sealed, gel-filled reference chamber that requires no refill solution for ease of use. A plastic cap protects the reference chamber in storage. The logger sensor has an experiment duration of 1.0 second to 31.0 days, and 15 bit analog-to-digital converter (ADC) resolution for reading a range of values. In addition to the nitrate electrode, the sensor operates with nitrate ionic strength adjuster (ISA) and nitrate 1,000.0ppm standard (included). Supplementary equipment required to conduct nitrate sensor experiments include a wash bottle with distilled or deionized water, several clean beakers, and 1.0mL, 10.0mL, and 100.0mL pipettes (sold separately). The nitrate logger sensor can be used for environmental, ecology, chemistry, and biology experiments, and is suitable for grade 3 and higher, or ages 10 to 21.

The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficiency, the logger sensor can store up to five experiments in flash memory, and saved experiments can be uploaded to a PC or Mac at any time. Additional accessories, such as USB, Wi-Fi, or battery modules, may be required for operation depending on the device (PC, tablet, viewer, and so on) used to receive readings from the sensor. (Accessories and devices sold separately.) The logger sensor includes a guide with instructions for use and care, and measures 6.5 x 7.0 x 1.5cm (L x W x H). (L is length, the horizontal distance from left to right; W is width, the horizontal distance from front to back; H is height, the vertical distance from the lowest to highest point.)

Logger sensors are electronic devices used to record a variety of energy and environmental measurements, such as temperature, humidity, voltage, and soil moisture, at set intervals over a period of time in scientific classroom and field settings.

Specifications

Range and operation modes 0.10 to 14,000.0mg/L
0.10 to 14,000 at N
ADC resolution 15 bit
Resolution:
0.1 mg/L (0.1 to 1,000 mg/L)
98 mg/L (1,000 to 14,000 mg/L)
0.1 ppm (0.1 to 1,000 ppm)
98 ppm (1,000 to 14,000 ppm)
Maximum sample rate (S/sec) 100

Science education products incorporate applied math and science principles into classroom and homeschool-based projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.

NeuLog brand products, manufactured by EISCO Scientific and Science Educational Systems (SES), include logger sensors, software, and accessories for energy and environmental data acquisition and measurement. EISCO Scientific was founded in 1968, and is headquartered in Rochester, NY; SES was founded in 1983, and is headquartered in Israel. Both companies meet International Organization of Standardization (ISO) standard 9001.

What’s in the Box?

Nitrate logger sensor
Nitrate sensor electrode
Nitrate ionic strength adjuster (ISA)
Nitrate 1,000.0ppm standard
Guide

 


Product details

  • Item Weight: 12 ounces
  • Shipping Weight: 12 ounces (View shipping rates and policies)
  • Domestic Shipping: Item can be shipped within U.S.
  • International Shipping: This item is not eligible for international shipping. Learn More
  • ASIN: B00B76OW1O
  • Item model number: NUL241

Related Items